EMC 2 кабельные Вводы Латунь BMEN-06, M50x1,5 / 22,0-32,0mm / TL=15,0mm
- Описание
Описание
• Specially designed EMC protective cable glands.
• Long-lasting contact by high definition contact spring.
• Easy assembly: 1- install cable gland 2- prepare cable sheath 3- insert cable 4- tighten cap.
• High quality strain relief and Seal, reliable performance for EMC applications.
Products specifications
| Material | Body , Cap | Brass Nickel plated | |
| Seal | CR ( Chloroprene ) | ||
| Clamping Insert | PA 6 (Polyamide 6) | ||
| Contact Spring | Special Copper Alloy | ||
| O-Ring | NBR | ||
| Ingress Protection Rating | IP 68 — 5 Bar, 30 min | ||
| UL Environmental Rating | TYPE 4X acc. to UL 50E | ||
| Flammability | V2 according to UL94 | ||
| Operating Temperature | Permanent | Intermittent | |
| -20 °C to +100 °C | -40 °C to +150 °C | ||
| Thread Type | |||
| Metric EN 60423 | |||
| PG DIN 40430 | |||
| NPT ANSI B1.20.1 | |||
| Other thread types also available upon request. | |||
| Cable Type | Shielded | ||
| Accessories | EMC Lock nuts | ||
| Dome plugs | |||
| Gaskets ( Washers ) | |||
| Remarks | In compliance with DIN EN 62444. | ||
| We recommend the use of threaded holes and/or the use of special EMC — | |||
| lock nuts to ensure high quality EMC contact quality. | |||
| Some approvals do not cover all sizes. | |||
| O-ring available in Metric and PG threads as a standard. For NPT — | |||
| threads O-ring available upon request. | |||
| Accessories must be ordered separately. | |||
| Other lock nut types also available upon request. | |||
| Outer | Thread Size (Male) | M50x1,5 | |
| Thread Length (TL) | 15,0 mm | ||
| Ø (D) | 61,0 mm | ||
| Clamping Range Outer Sheath Ø min — max | 22,0 — 32,0 mm | ||
| Shield Diameter Ø min-max | 20,0 — 27,0 mm | ||
| Spanner Width | Cap | 50 mm | |
| Body | 55 mm | ||
| max. Height (H) | 50,0 mm | ||
| Part Number | BMEN-06 | ||
